Pipeline insulation is an important component of pipeline insulation in our daily lives. In order to better ensure the quality of pipeline insulation construction, there are many precautions that need to be taken. In the process of pipeline insulation construction, high-temperature glue should be used to bond the pipeline insulation layer to the waterproof silicate insulation board, and then a part of the gap should be tightly sealed with insulation mud, wrapped with fiberglass cloth and coated with waterproof coating, and corresponding thin aluminum plates should be installed.

Insulation engineering technologies such as pipeline engineering, pipelines, storage tanks, high-pressure reactors, and reactors are very helpful for pipeline insulation. The ability of pipeline insulation structure to achieve good insulation effect is closely related to the selection of materials. As a commonly used insulation method, pipeline insulation structure is simple, easy to construct, and easy to operate.

Our factory looks forward to every customer, and we will bring you a perfect construction experience. You come to our factory to consult about pipeline insulation construction knowledge. Through years of construction experience, we can improve the construction efficiency for you. Our factory has a pipeline insulation construction team. The insulation project here must ensure that its construction quality, type, and performance strictly comply with the provisions of the design documents. Our factory's pipeline insulation construction team is a professional technical team from some insulation manufacturers, with experienced internal technical personnel. Whether it is equipment insulation or pipeline insulation, using pipeline insulation technology can achieve good insulation effects. Firstly, let's understand the construction technology of pipeline insulation.

There are many details in the material selection for pipeline insulation projects. Firstly, thermal conductivity. Rock wool, glass wool, and other insulation products have low thermal conductivity, which reflects good insulation performance and can be reused. The main purpose of pipeline insulation construction is insulation, and we can see that the pipeline insulation layer has more alkali than the external anti-corrosion layer. Generally speaking, it has external anti-corrosion properties such as wear resistance, complete acid filtration, organized acid, and organized water solubility. The exposure after cleaning must be aesthetically pleasing, low, and not significantly reduced.

The insulation surface of the pipeline should be clean, free of oil stains and floating dirt. If the old wall is loose, the weathered part should be removed and the protruding part exceeding 10 millimeters from the surface should be leveled. In addition, for concrete and block walls, the interface mortar should fill the drawings. The temperature of the insulation layer of the first white pipe should not exceed 10mm, the thickness of the insulation paste of each white pipe should not exceed 20mm, and the interval should be greater than 24 hours.

After completing the first step above, the second step is to lay the roof with amorphous insulation material, then lay a layer of 1cm insulation paste, install a thin aluminum plate, and apply sealant. This completes the second step. Some advantages of pipeline insulation are: in emergency situations, it is not easy to burn, does not easily produce hidden toxins, and is harmful to the health of livestock. Gathering together, a warm moment. Some flash points of ethylene: In emergency situations, it can be used for many years without complex combustion. Has cold resistance.