After the thermal insulation decorative integrated board determines that there is no delamination, hollowing, cracks, etc. on the base wall, the horizontal and vertical control lines are marked according to the design plan. Drill holes to bury anchor bolts and fix anchors. Cut the board according to the size, cut the edge grooves, and apply more than 60% adhesive on the board surface. The high-performance rigid foam plastic with a honeycomb closed-cell structure made by heating and extrusion molding has a certain thickness in the interconnected walls of these honeycomb structures, and there will be no gaps. The uniform organization formed during the extrusion process makes the product have excellent thermal insulation performance.

The anchoring method, node and cold bridge design of the product effectively reduce energy-saving losses, especially the thermal insulation decorative integrated board in harsh climate areas such as the Northeast and Northwest, where energy-saving and thermal insulation requirements are very high, and 65% of the building energy-saving design requirements are followed. The materials for exterior wall insulation look almost the same as those for interior wall insulation, but the internal materials are very different. Some materials are explicitly stipulated by the state to be used only for interior or exterior wall insulation. Before decorating a house, you should ask clearly about the wall insulation materials used.

Do a good job of protecting the finished products. For the newly constructed walls, avoid rain soaking and collision, and keep the construction site ventilated and dry. When the temperature exceeds 25℃ in summer, watering is required for maintenance; in winter, pay attention to antifreeze and strong wind when carrying out exterior wall insulation projects. This material is used in the exterior wall insulation system. Bold innovation and attempts in the field of building energy conservation, too many thermal bridges, and the risk of condensation is very high. In addition, the construction flatness is also difficult to control, and the risk of thin plastering system falling off is also high.