The building exterior wall insulation board is covered with a special fluorocarbon resin, which can effectively isolate water, acid, alkali and stains in the air, effectively protect the decorative layer, and its weather resistance far exceeds the thin plastering system, and is less affected by the environment. This system is suitable for the insulation and decoration of the exterior walls of public buildings and residential buildings that are newly built, expanded, and renovated in all areas, and can fully meet the energy-saving requirements of various types of buildings.

The decorative insulation integrated board has very good corrosion resistance and can effectively resist the erosion of rainwater. The insulation and decoration integrated board is simple and convenient to construct, eliminating the connectors and avoiding the safety problems caused by the keel and connectors being easily corroded by dew. Press the mortared exterior wall insulation integration on the base wall, and gently knead and squeeze to spread the bonding mortar evenly. Let it stand for 10 minutes, stir it again and it can be used. The prepared bonding mortar should be protected from the sun and used up within 2 hours.

The exterior wall insulation decoration integration is specially designed and produced for the building exterior wall insulation thin plastering system. It is suitable for exterior wall insulation or energy-saving transformation of new or existing buildings based on dense structures such as concrete or brick walls. Nowadays, many people are doing insulation work for their houses.

The exterior wall insulation decoration integration should be arranged in horizontal order. The smooth surface insulation board should be polished. The insulation board should be cut into notches with a special slotting tool when installing the grid line or decorative line. The thickness of the insulation board at the notch should not be less than 35mm. Then paste the mesh cloth, press it gently with a trowel, and then scrape a thin layer of anti-cracking mortar outside the mesh cloth, so that the mesh cloth is on the outside of the anti-cracking mortar layer, so that it can play an anti-cracking role.