The mortar for pasting extruded boards must be mixed in a reasonable proportion. The mixing proportion must follow the instructions. When pasting, the mortar should be evenly distributed on the surface of the extruded board, and try to cover the entire extruded board to prevent the pasted extruded board from being unstable due to the lack of mortar in some parts. People will see that Baoding extruded boards also play a big role in use, and they will be used in large quantities in some industrial fields. The extruded board manufacturer produces this product because of its good quality, so when it is used, its wear resistance is also very strong.

Baoding extruded board strip sticking method: Use a toothed trowel to evenly apply the special adhesive on the extruded board horizontally, with a strip width of 10, a thickness of 10, and a center distance of 50. Quickly stick the extruded board with the special adhesive on the wall to prevent the surface from crusting and losing the bonding effect. The mortar for pasting extruded boards should be applied on the back of the extruded boards, and the area of the bonding mortar should not be less than 40% of the area. Generally, the point frame method can be used for pasting, and the board gap should not be greater than 3mm.

Extruded board has excellent anti-corrosion performance, and will not be affected by the external environment even after long-term use. It has excellent stability and will not be reduced by corrosion. Inferior extruded board has poor stability and may absorb water or be corroded after a short period of time.

Extruded board is superior to other insulation materials in terms of thermal insulation performance, water absorption performance and compressive strength, so it is also unmatched by other insulation materials in terms of insulation performance. Flatness adjustment should be made by tapping with a rubber hammer, and should not be adjusted by up and down or left and right displacement, so as to avoid the adhesive overflowing into the gap between the boards due to the displacement of the extruded board, forming a cold bridge, which will have a greater negative impact on the insulation effect of the external insulation system.