Thermosetting polystyrene board continues the advantage of low thermal conductivity of traditional organic insulation materials, and has better insulation effect than the common phenolic board, foam board and other common insulation materials on the market. Make the building more energy-efficient and make the room more comfortable. It can effectively block the conduction of heat from the foundation to effectively prevent the spread of fire. At the same time, it is also a good waterproof, moisture-proof and antifreeze material. Its quality is very light, which makes it very convenient for us to construct it.

Thermosetting polystyrene board needs to raise the standard appropriately in some areas with harsh environment to ensure that people's insulation needs are met. Before pouring, check whether the insulation board fits tightly with the wall and there should be no gaps, otherwise the effect will be weakened. According to the determined construction process requirements of the insulation project, do a good job in the construction technology briefing of the insulation project, and supervise the construction process according to the requirements of the construction process and briefing. In order to ensure the construction quality of the insulation project, determine the acceptance criteria for each construction process.

When selecting the thermosetting polystyrene board system, the structure and component materials of the system shall not be changed; the thickness of the thin plastering mortar layer should be controlled at: ordinary type 3-5mm. The design is to use paint finishes. When the building height is above 20m, it is advisable to use bonding as the main method. Thermosetting polystyrene boards should be cut out of a whole piece of thermosetting polystyrene board, and broken (small) pieces should not be used for splicing. When laying mesh cloth, a standard mesh cloth (200×300mm) should be pasted at the four corners of the hole along the 450 direction to prevent cracking at the corners.