With the rapid development of the construction industry, the application of new building materials is becoming increasingly widespread. Among them, the exterior wall insulation and decoration integrated panel has been favored by the construction industry due to its excellent insulation performance, beautiful decorative effect, and easy construction. However, in order to ensure construction quality and safety, we must strictly comply with the construction specifications of the external wall insulation and decoration integrated panel. This article will provide a detailed introduction to the construction specifications for the integrated panel of exterior wall insulation and decoration.

1、 Preparation before construction

Before construction, all aspects of the construction site should be inspected to ensure its safety and cleanliness.

2. Prepare all necessary construction tools and equipment according to the design drawings and construction requirements.

3. Provide professional training to construction personnel to ensure they are familiar with the construction process and operating procedures of external wall insulation and decoration integrated panels.

2、 Material preparation

1. The external wall insulation and decoration integrated board should be stored and transported according to the design requirements and construction sequence to prevent the board from being damp, deformed or damaged.

2. Before construction, a quality inspection should be conducted on the exterior wall insulation and decoration integrated board to ensure that the size, color, surface flatness, and other aspects of the board meet the design requirements.

3、 Construction process

1. Grassroots treatment: The grassroots should be cleaned up and free of oil stains, dust, and other debris. For the base layer with cracks and hollows, repair treatment should be carried out.

2. Paste insulation and decoration integrated board: Apply a special adhesive on the base layer, then paste the insulation and decoration integrated board on the base layer, compact it with a special tool, and ensure that the board is in close contact with the base layer.

3. Joint treatment: The joints of the integrated insulation and decoration board should be tight, and the joints should be sealed with special sealant.

4. Install fasteners: Install fasteners such as angle steel, screws, etc. according to design requirements to ensure the stability of the insulation and decoration integrated panel.