External wall insulation materials are produced in a modular, standardized, serialized, universal and diversified manner, and meet the requirements of green, energy-saving, environmental protection, safety, light weight, high strength and multi-function; secondly, there must be perfect and supporting application technology, including design and construction specifications.

External wall insulation materials have good insulation effect in use, but due to the characteristics of the board, the polystyrene board is mainly fixed with points and supplemented with surface fixation when connected to the main body during construction. The boards must be spliced and bonded, which is not suitable for buildings with complex shapes.

The specific requirements of the overall task of improving the energy-saving level of new and existing buildings. Insulation materials directly affect the thermal performance of the building's external envelope structure. Energy-saving standards require the insulation layer to be thicker accordingly. For example, the energy-saving rate is increased from 65% to 75%, which requires the thickness of the external wall insulation. Use a special adhesive for insulation board and use the point bonding method for construction, and use the point bonding method to control the key points. The bonding area between the board and the base wall should not be less than 30% of the board area. All areas around the door and window openings, the corners and ends of the external walls, and 100mm from the top and the ground.

The exterior wall insulation material project can only be completed with high quality, which are also some regulations that all exterior wall insulation materials should follow. The exterior wall insulation project should be designed with a sealed and waterproof structure to ensure that water does not penetrate into the insulation layer and the base layer, and detailed drawings should be provided for important parts. So don't put all the insulation materials on the construction site at once, but take a part first, and control the storage volume. Generally, it can be stored for two or three days at a time. Wait until you run out, and then increase the amount of insulation materials, so that it will be more convenient when decorating.

Strengthen the quality supervision of the construction process of exterior wall insulation materials and the sense of responsibility of technical personnel, gradually improve the quality of exterior wall insulation materials, and greatly reduce the occurrence of cracks and shedding. The exterior wall insulation material factory stated that the building floor height of the exterior wall insulator is much lower than the standard floor.