The integration of thermal insulation and decoration often appears in the field of exterior wall decoration of major buildings. The development status and trend of thermal insulation and decoration integrated panels are generally positive, and they also have ideal effects in improving consumer living conditions. The application level will be further improved in the future. Since the slight unevenness and roughness of the base wall can be adjusted by special mortar, the thermal insulation decorative panels have relatively low requirements for the flatness and smoothness of the base, and the treatment is relatively simple. When installing the thermal insulation decorative panels on site, a joint is reserved between the two panels.

Its function is not to increase the bonding force, but to form the mortar surface on the concrete surface so that the surface treatment is unified after the mortar is sprayed. If there is no internal insulation, the inner wall of the original inner wall will be the same as the room temperature. If the inner wall is insulated, the inner wall will be very cold. When it is very cold outside, the heat passing through the wall will be reduced. If there is a place with high air content, there will be problems on the inner surface of the wall.

Before applying cement to the newly built exterior wall, wire mesh should be hung to increase the firmness of the wall and the external tiles to avoid cracks in the newly built light-weight wall. Plaster layer falls off and other phenomena. The cement mortar ratio should be correct to prevent large-scale cracking on the surface of the plaster layer.

It is worth mentioning that the integrated thermal insulation and decoration has a perfectly closed honeycomb structure, which makes the XPS extruded board have high compressive resistance and anti-aging ability. Therefore, houses that are lived in for a long time can consider using this kind of interior wall insulation material for insulation, and it does not need to be replaced for a long time.