External wall insulation integration should be arranged in horizontal order. Smooth surface insulation boards should be polished. Special grooving tools should be used to cut the insulation boards into notches when installing grid lines or decorative lines. The thickness of the insulation boards at the notches should not be less than 35mm. When the lines protrude from the wall more than 100mm, mechanical anchors need to be added.

The possibility of falling off is eliminated from the root. In addition, the modular production of the factory and the construction process of bonding and anchoring greatly meet the requirements of the current prefabricated buildings, avoiding the problem of external wall insulation renovation and repair of the building after several years. It is beneficial to the heat resistance of the house, can avoid large temperature differences in indoor temperature, and improve the moisture condition of the wall. The key to the actual sound absorption effect of the insulating rock wool board lies in the relative density of the rock wool insulation board in the total area of the enterprise. The greater the relative density, the better the actual sound absorption effect.

External wall insulation integration should be arranged in horizontal order. After the material is installed on the wall, if the size of the board is unstable, the insulation board system will be more prone to cracking and deformation, leaving safety hazards. The insulation layer and the finishing layer are chemically synthesized at one time, which is different from most exterior wall insulation materials on the market.

Uniform and beautiful appearance: rubber and plastic have high elasticity, smooth surface, and soft texture. Even if installed on irregular components such as elbows, tees, and valves, they can remain intact and beautiful. The appearance does not require decoration, and it can be beautiful even without a ceiling. The material configuration of the integrated exterior wall insulation should be arranged in a horizontal order (the following description takes WW insulation material as an example). According to different regions, different seasons, different climate characteristics, different air humidity, and different base wall materials, the weight ratio of WW inorganic insulation material to water is about 1.5:1.