The exterior wall insulation decorative integrated board is an exterior wall insulation product. The building insulation layer material and the decorative layer material are prefabricated in the factory and fixed to the base wall by anchoring at the construction site. The exterior wall insulation decorative integrated board is a composite board formed by a single-sided steel wire mesh plus an extruded polystyrene board and a lightweight composite concrete with a thickness of (10-15) mm on its outer side. The standard board size is 2.4×0.6m.

Exterior wall insulation decorative integrated board is prefabricated in the factory

The optimization of indoor environment by insulation is obvious to all, not only in temperature difference changes, but also in sound insulation and noise reduction, so insulation is not redundant. The insulation decorative sintered integrated board is truly achieved, and the insulation layer and the finishing layer have no interface fusion. It is suitable for the insulation construction of large exterior walls. Secondly, the insulation effect of the exterior wall is achieved by mortar with insulation performance. The biggest advantage of this technology is that the insulation construction can be completed in one go without causing damage to the wall, which is conducive to building quality assurance and is very efficient.

The process of exterior wall insulation decoration integrated board does not require bonding mortar to fix the board on the back of the board, but relies on the basic strength of the connector and anchor embedded parts to bear the load transferred by the surface, forming a closed air layer of a certain width between the board and the wall, which can be directly fixed on the keel.

The curtain wall connection method of the exterior wall insulation decoration integrated board is safe and reliable, especially suitable for high-rise buildings. The construction is not affected by the season and the operation is convenient. The embedded parts are easy to process, and the fasteners are basically standard parts. The composite aluminum plate is an industrialized product, and the insulation material is of fixed quality.