The Shandong extruded polystyrene board manufacturer stated that during construction, the ambient temperature on site and the surface temperature of the bottom wall should not be lower than 5 degrees, and the wind force should not exceed 5 degrees. Appropriate safety protection measures should be taken during winter construction. The manufacturer of extruded polystyrene board reminds us to pay attention to safety issues during the construction process, especially in terms of electricity usage.

A water-based acrylic primer, intermediate coat, and topcoat coating system with decorative and protective functions on the surface of extruded board systems, used as a water-based acrylic coating finishing layer for on-site painting of extruded board systems in industrial and civil buildings. Extruded polystyrene board has superior insulation performance, water absorption performance, and compressive strength compared to other insulation materials, so its insulation performance is also unmatched by other insulation materials. In addition, extruded boards can almost prevent the erosion of inorganic acids, organic acids, and organic solvents, and have good aging resistance.

Another point is the convenience of construction. Many new materials do not have corresponding construction convenience, such as vacuum insulation boards, which are difficult to cut on site and have low adaptability to the base wall surface. Safety measures should be taken according to the design requirements, and the leveling layer should be made into a circular arc with a radius of 100-150mm. According to the design requirements, the slope should be marked, the rules should be found, and thorough cleaning should be carried out to ensure safety measures are taken.

Construction safety should be achieved through the use of hanging baskets and double row scaffolding, which should be firm and reliable, in compliance with relevant specifications and regulations. The distance between the horizontal and vertical poles of the scaffolding and the walls and corners should be moderate, and the laying and installation of scaffolding boards should be in accordance with the grid.