The integrated wall with insulation and decoration is easy to install and has a unique installation method. Moreover, the self insulated outer structure belongs to the composite block shaped board. If there is secondary disassembly, filling and replacement due to design changes or other factors, only the disassembled parts need to be separated.

External insulation can reduce the amount of insulation materials used, increase the indoor usable area of the house, and facilitate hanging and fixing objects on indoor decoration and walls. The use of external insulation not only improves the moisture caused by external moisture on the wall, but also greatly enhances the airtightness of the wall. When using, special adhesive should be applied to the extruded board, and the debris after tapping should be cleaned. Interface adhesive should be applied to the veneer, and after the adhesive dries, they should be neatly stacked to prevent deformation of the board.

The basic structural factor of integrated insulation and decoration is that the exterior wall of the frame structure is prone to damage to the insulation layer due to deformation of the masonry at the connection between the truss beam and the masonry. Scaffold holes and other components are not solidified, resulting in partial damage to the base layer of the insulation layer. The external wall decorative components are not firmly fixed or displaced. The quality of extruded polystyrene board needs to be noted because the board itself is made of wood. In order to ensure stable performance, it is necessary to place it in a suitable environment. The stability of its position brings us great benefits.

The thermal conductivity of the wall structure with integrated insulation and decoration is 16 times lower than that of cracked mortar, while compared with extruded polystyrene board and polystyrene board, the thermal conductivity is relatively small. Another factor that affects the outer wall is the reinforcement net. The insulation performance of extruded polystyrene board is very good, but the later use and maintenance methods are also closely related. Therefore, in order to extend its service life, attention should also be paid to storage and maintenance.