The joint between the external wall insulation and decoration integrated board and the insulation brick masonry is formed, and ordinary brick masonry needs to be made with insulation materials to compensate for the joint with the insulation brick masonry. Good thermal insulation performance, high foam rate, light weight, low compressive strength. The reasonable relationship between the two ensures a high foaming rate. And good compressive strength is the ideal product, that is, the lighter the unit weight of the product, the higher the compressive strength of foam board products.

External wall insulation and decoration integrated panel system: The decorative layer of the external wall insulation and decoration integrated panel adopts a special fluorocarbon coating, which has excellent hydrophobicity. The decorative panel adopts high-density calcium silicate board, which is not easy to crack or crack, and has good waterproof effect. The poor adhesion of materials, weak structural cohesion, and poor breathability result in XPS boards being subjected to seasonal changes in nature and creep stress of building structures, which shorten the service life of external wall insulation systems.

The solution for laying integrated panels for exterior wall insulation and decoration is suitable for large surfaces, which can reduce the overall wall thickness while ensuring excellent indoor air quality, preventing water infiltration and limiting mold formation. Space saving, easy storage and on-site installation, and for the same building exterior wall, its thickness can be smaller than other types of insulation materials; Due to the closed cell structure of the inner layer. Therefore, it has good moisture resistance and can maintain good insulation performance in humid environments. If there is overlap in paving, it must meet the overlap length of 100mm horizontally and 80mm vertically. Before the bottom mortar is set, a layer of plastering mortar should be applied, and only the mesh cloth should be covered. Just look at the outline of the mesh cloth. Do not constantly rub the surface of the mortar, otherwise gaps will form.