Anti-aging ceramic inorganic insulation materials that traditional organic insulation materials cannot match have good durability, do not age, and have the same service life as the building. Part of the wall is covered with a fireproof layer, and an alkali-resistant glass fiber mesh should be placed at the bottom, and the vertical width of the mesh should not be less than 100 mm.

The bottom layer should be solid and flat, and the protruding parts of the wall should be cleaned and flattened. When mechanically fixing the EPS steel wire mesh, the supports should be installed layer by layer, and the supports should be fixed to the structural members. The width and height of the EPS steel plate mesh are 1.2m and 1.2m respectively. The upper and lower joints of the wooden boards should be staggered, and the width of the staggered gaps should be 1/2. The vertical joints between adjacent boards are tied with galvanized iron wire and connected to the wire mesh. If the scaffolding cannot be removed from the hole, the entire part should be repaired together after the base layer is in place. Keep the 600*600mm shell and use the same batch of materials for repair. Pay special attention to the details of controlling the joints and negative spraying of each part of the window frame.

The same is true in the new exterior wall insulation material industry. Only by promoting the growth of domestic demand for exterior wall insulation materials can the insulation material industry develop rapidly. Green energy saving and green buildings are undoubtedly optional.

The internal needs to meet 7 standards:

1. Exterior wall insulation materials should save energy;

2. Reduce pollution emissions;

3. Improve the living environment;

4. Strengthen the strategic industry of new exterior wall insulation materials;

5. Cultivate new economic growth points;

6. Promote scientific and technological innovation.

7. Vigorously promote green building insulation systems,

Building wall insulation energy saving This will not only promote industrial upgrading, change the growth mode, drive the economy, and stimulate domestic demand, but also the subsequent energy saving and emission reduction benefits will be far greater than the cost we paid at the beginning.