The integrated exterior wall insulation and decoration uses a combination of multiple materials to form a systematic solution to the dual problems of insulation and load-bearing. If condensation occurs in the insulation layer, it will reduce the insulation effect of the material. If the water vapor cannot be discharged, the material may become moldy. The ratio of thermal insulation material to water weight is about 1:1, and should be adjusted appropriately according to different regions, seasons, base wall materials and construction requirements. Stir the ingredients for 3-5 minutes until they are uniform and easy to use.

The quality of integrated materials for exterior wall insulation and decoration is improperly selected. Because the plastering mortar layer was deformed and hollowed out, the composite wall was made of incompatible materials and uncoordinated deformation, and the waterproofing measures for the exterior wall were not in place.

The integrated exterior wall insulation and decoration maintains the thermal performance of the structure so that heat energy can be used inside the building without losing it quickly. It can be seen that the development of wall insulation technology and the promotion of technical materials are ways to save energy in buildings. Before construction, it is required to install doors, windows and other relevant parts. According to the inspection by the quality department, the size and position of each window must be calculated and quality requirements.

The downpipe clips, embedded iron parts, equipment wall pipes, etc. on the exterior wall tiles are installed in advance, and the thickness of the exterior insulation layer is pre-embedded. The construction of the integrated exterior wall insulation and decoration project shall be erected firmly with electric hanging baskets or special external scaffolding. Therefore, when inspecting the quality of thermal insulation mortar, the single package of thermal insulation mortar should be fully mixed and evenly mixed, and then samples can be taken for testing.