The new exterior wall insulation integrated board wallpaper is not easy to clean the surface, and the wallpaper has poor moisture resistance. Once it gets wet, it will be moldy and replaced. The wood veneer wall will not change when it comes into contact with water. Compared with tiles, this product can prevent moisture in the rainy season and avoid water droplets. When storing the insulation board, you should pay more attention and try to put it in a cool, dry and ventilated place. Such an environment is suitable for the storage of the product, and the probability of damage will be effectively reduced, which can naturally effectively guarantee its service life.

The exterior wall insulation integrated board must ensure the installation quality. Improper installation will also affect the performance of the material. It is best to follow the instructions during installation, and then do a good job of testing. It can be put into use only after ensuring that there are no problems. After the insulation decorative material is laid, the bottom of the exposed surface on both sides should be close to the beam surface. If there is a gap, it must be sealed with an adhesive to prevent water vapor and clear water from penetrating, so that the surface of the exterior wall insulation integrated board is cleaner.

Before applying polymer mortar to the bottom layer of the exterior wall insulation integrated board material, clean the bottom surface of the insulation decoration material first, apply the interface agent on the surface, wait for it to dry until it is not sticky, and then evenly apply the polymer mortar on the bottom surface of the insulation decoration material, and try to control the thickness to about 2mm. When the auxiliary external formwork is supported and dismantled, the floor slab concrete and the insulation decoration material form a bite and connection. After the auxiliary formwork is removed, the entire insulation decoration material is integrated with the exterior wall to form the external insulation layer of the exterior wall.

In addition, attention should be paid to the surface flatness of the exterior wall insulation integrated board, otherwise the aesthetics will be greatly affected. In addition, in the installation of insulation decoration materials, the gap between materials should be as large as possible, and the surface should be cleaner. Once it is too large, it will inevitably not perform well in terms of flatness.