Linyi floor heating extruded board is a common heat dissipation board for floor heating system. Its installation process directly affects the effect and service life of the floor heating system. This article will introduce the installation steps and precautions of floor heating extruded board in detail to help readers install Linyi floor heating extruded board correctly and efficiently.

First of all, before starting to install the floor heating extruded board, you need to ensure that the ground is flat, dry and free of obvious obstacles. Clean the ground, remove dust and debris on the surface, ensure that the ground is smooth and clean, and prepare for the installation of the extruded board.

The second step is to arrange the floor heating pipes. According to the design requirements and the floor layout drawings, determine the direction and layout of the floor heating pipes. Fix the floor heating pipes on the ground section by section, and leave appropriate expansion gaps to prevent expansion and contraction caused by changes in pipe temperature. Ensure that the joints of the floor heating pipes are firm and reliable, without looseness or leakage.

The third step is to install Linyi floor heating extruded board. Lay the extruded board on the ground and combine it with the floor heating pipe. The size of the extruded board should be adjusted and cut according to the actual situation to ensure that it can fit the floor heating pipes completely. The laying of extruded boards should start from the corner of the room and gradually lay to the edge of the entire room in a fixed direction. During the laying process, pay attention to the connection between the extruded board and the floor heating pipe to ensure a close fit and no heat leakage.

The fourth step is to fix the Linyi extruded board. Use a special extruded board fixer to fix the extruded board to the ground. Before applying the fixer, spray a special adhesive on the back of the extruded board to enhance the fixing effect. Use a scraper to evenly apply the fixer on the back of the extruded board and ensure that each extruded board is firmly bonded.

The next step is to treat the joints between the extruded boards. Use special adhesive tape or tape to close and seal the joints of the extruded board. Ensure that there are no gaps and heat leakage at the joints to prevent the loss of heat energy.

The last step is to protect and decorate the ground. After installing the floor heating extruded board, the protective layer and decorative layer of the ground can be installed. The protective layer can be a moisture-proof film or a waterproof layer to prevent leakage of the floor heating water pipe. The decorative layer can be made of materials such as flooring and tiles according to personal preference, and covered on the top of the extruded board to complete the installation of the entire floor heating system.

During the installation of Linyi floor heating extruded board, the following points should be noted:

1. Strictly follow the installation instructions provided by the manufacturer to ensure the correctness and effectiveness of the installation.

2. Pay attention to the connection between the floor heating extruded board and the floor heating pipe to ensure a tight fit and no heat leakage.

3. Pay attention to the joint treatment between the extruded board and the extruded board to ensure that the joint is closed and sealed to avoid heat loss.

4. After completing the installation of the floor heating extruded board, perform system pressure testing and testing to ensure the normal operation of the floor heating system.

5. Regularly maintain and clean the floor heating system to maintain its normal operation and service life.

In summary, the installation of Linyi floor heating extruded board is a complex and important task. The correct installation process and method can ensure the effect and service life of the floor heating system. When installing floor heating extruded panels, you must strictly follow the relevant installation instructions and requirements, and pay attention to details such as the connection between the extruded panels and the floor heating pipes, and the seam treatment to ensure the installation quality and use effect.