Paint is often used on the exterior walls of buildings to increase beauty and strengthen protection, but after a long period of wind and sun, the color will decline, but it will be uglier. Later, exterior wall tiles began to be used. In terms of decoration, it has various patterns and colors, and it is very beautiful. After the surface of the material is leveled, use sandpaper of 240 mesh or above to polish the scratches and burrs left on the surface to make the surface smooth, the yin and yang corners vertical and square, and the edges neat and clean. When polishing, polish as soon as possible after drying. Generally, after 24 hours, if it is placed for too long.

Paint is often used to increase the beauty of the building exterior wall insulation decoration integrated board

The insulation decoration integrated board uses a special process and is made in the workshop by fluorocarbon resin glazing. In this way, a transparent paint film will be formed on the surface of the ornaments, which is high in density, hard, and tough. Such a production process.

When the insulation decoration package is installed by the sticking anchor (or sticking hanging) process, its actual practical height should not be greater than 40m, and a special design should be carried out. Its durability needs to comply with relevant regulations and design requirements. When mechanical anchors are used to anchor the EPS board, the anchors should be installed at least 24 hours after bonding. On the concrete wall, use an impact drill to drill holes inward on the surface of the EPS board. The diameter of the hole depends on the anchor bolt, and the depth of entry into the wall is not less than 35mm.

The exterior wall insulation and decorative integrated board is adjusted and colored according to the different needs of customers. It has different textures and multiple colors. The finishing layer is colorful and has a realistic stone texture and various colors. The decorative insulation integrated board has very good corrosion resistance and can effectively resist the erosion of rainwater. The insulation and decorative integrated board is simple and convenient to construct, eliminating connectors and avoiding safety problems caused by the keel and connectors being easily corroded by dew.