The performance of the integrated system of exterior wall insulation and decoration is very consistent with the needs of insulation materials. When purchasing this type of mesh cloth, we should see whether its structure is intact, whether the mesh distribution is even, and whether the separation of warp and weft is strong enough. The integrated system of exterior wall insulation and decoration with excellent insulation performance can increase the safety of the building, and these strong materials have a longer service life, the same life as the building, and to a certain extent, can reduce a lot of expenses.

During the construction of exterior wall insulation, construction shall not be carried out when the base and construction environment temperature is lower than 5℃. Construction shall not be carried out in windy weather, rainy weather, and snowy weather. During and after construction, effective measures should be taken to prevent rain erosion and scorching sun exposure, and a protective layer should be made in time. There are relatively more users who install integrated materials for exterior wall insulation and decoration in spring and autumn, so the price of integrated exterior wall insulation and decoration will definitely increase in these two time periods, and even they are affected by seasonality.

When pasting the integrated exterior wall insulation and decoration, it is necessary to use the push-kneading and squeezing method within the range of 20cm above and below. The rock wool insulation board bonding mortar must meet the quality requirements, and the insulation board bonding mortar configuration consistency cannot be too low or the viscosity index control is inaccurate. When the insulation object is placed vertically and has a considerable height, its insulation layer must have positioning pins or support rings, and the spacing should not be greater than 3 meters to prevent the insulation material from sliding down when there is vibration.

The shrinking area of the integrated protective layer of the exterior wall insulation decoration is relatively large, which will cause many flaws in the growth inside. When the viscosity of the protective layer and the insulation layer is increased, there will be relatively empty places, because the response ability of the doors and windows inside is incomplete.