The exterior wall insulation decoration integrated board must ensure that the base is dry, clean and flat, so it is necessary to conduct a comprehensive inspection of the base and fill the concrete defects, construction joints, etc. The base of the exterior wall must be clean and flat to ensure. According to the building facade design and the technical requirements of the exterior wall insulation, the horizontal and vertical control lines of the exterior doors and windows, the expansion lines, the decorative seams, etc. are popped up on the wall. Paste the mesh cloth. All the exposed parts on the side of the polystyrene board should be covered with mesh cloth.

Insulation decoration integration adds a certain amount of inorganic auxiliary materials to the new green inorganic unit packaged dry powder insulation coating. Mix the insulation coating with water and scrape it on the insulation wall. After drying, a microporous mesh high-strength structural insulation layer can be formed. Exterior wall coating method, 5 thick polymer cement mortar is pressed into the mesh cloth, instead of 5 thick anti-cracking mortar pressed into the hot-dip galvanized steel wire mesh, the wire diameter specification is 0.9, the hole spacing is 12.7*12.7mm, and the overlap is 100mm. Two-way plastic anchor bolts are used for fixing, with a spacing of 500mm.

The base inspection of the integrated thermal insulation and decoration is made of ceramic thin plates pressed at a high temperature of 1300 degrees. It can reduce the temperature of the exterior wall under direct sunlight. Secondly, it is well known that the closed-cell rate is closely related to the thermal conductivity coefficient. The higher the closed-cell rate, the better the quality. The decorative surface of the integrated thermal insulation and decoration uses metal material embossing decoration effect, which overcomes some problems that were often encountered in the construction process in the past, such as wall cracking, paint discoloration, and easy wall dirtiness. It not only ensures the credibility and decorative effect of the product assembly.

The function of the integrated thermal insulation and decoration material is to be used for thermal insulation, so whether its thermal insulation performance is good is the key to product quality. Understand the base inspection of the thermal insulation material to reflect whether the quality has problems by checking the thermal conductivity of the material. The thermal insulation effect is the foundation of the foundation. Only if the thermal insulation effect is excellent can it be called an excellent product. If the thermal insulation effect is poor, then if we use it on this basis and add sound insulation, it will make the indoor environment better, whether it is office or rest.