The thermal insulation decorative integrated board is a high-level thermal insulation board that uses new technology to build the exterior wall structure of the building. It integrates thermal insulation, waterproofing and decorative functions, and is suitable for thermal insulation and decoration of various building exterior walls. It can be used normally at 0-100℃. At the same time, it has strong anti-aging ability and excellent UV resistance, which can meet the fading and cracking phenomena caused by various ultraviolet rays, high-intensity use and long-term open-air storage conditions.

The new technology of the thermal insulation decorative integrated board adopts a hanging installation method, which has higher construction efficiency, 60% higher construction efficiency, and a simple system structure. Traditional thin plastering insulation system: It needs to go through the complex construction of adhesive layer, insulation layer, first layer of plastering mortar layer, anchor, second layer of plastering mortar layer, and exterior finishing layer.

Widely used for wall and floor insulation. This extruded board with a thickness of 2-10 cm is generally bonded to the base layer on the surface of the building's exterior wall with a special adhesive, and the outer side is protected by a flame-retardant glass fiber mesh and cement bonding mortar to form an exterior wall insulation system. The holes in the wall should be filled with the same base wall material and smoothed with 1:3 cement mortar. Then, according to the hole size of the extruded board, cut the extruded board and polish its edges so that it can be tightly sealed in the hole.

The new technology of thermal insulation and decoration integrated board has good thermal insulation performance and can achieve higher energy-saving effect. Phenolic insulation board does not absorb water, is not afraid of rain, has very good dimensional stability, and will not shrink or deform in any environment. On the other hand, after the waterproof layer is completed during the thermal insulation and decoration construction process, only a layer of mung bean paste is sprinkled on it, which makes the waterproof layer exposed to sunlight for a long time, and the waterproof layer often ages and leaks, so the waterproof layer needs to be replaced frequently.